لیست مقالات بین المللی (ISI) دانشگاه علم و صنعت ایران در سال 1393 (2014)
پژوهشگران دانشگاه علم و صنعت ایران در سال 1393 کلا 2702 مقاله شامل 1193 مقاله در کنفرانسهای داخلی و 278 مقاله در ژورنالهای داخلی و ۱۲۳۱ مقاله بین المللی (ISI) ارائه نموده اند. دیتای کامل این مقالات در مجموعه سیویلیکا موجود و تحلیل شده است. جدول زیر مشخصات حداکثر 100 عنوان مقاله عنوان تعدادی از این مقالات را نمایش می دهد. در دانش علم سنجی، اگر حداقل یکی از نویسندگان یک مقاله مربوط به یک مرکز باشد، در آمار مقالات تهیه شده توسط آن مرکز محاسبه می شود.
-
درخواست گزارش کامل مقالات دانشگاه علم و صنعت ایران
کلیه داده های مقالات داخلی و خارجی دانشگاه علم و صنعت ایران شامل 2702 مقاله با مشخصات نویسندگان، محل و سال نشر در مجموعه سیویلیکا ثبت شده است و امکان ارائه هر گونه گزارش تخصصی علم سنجی شامل تحلیلهای محتوایی و موضوعی برای این مرکز وجود دارد.
لیست مقالات بین المللی (ISI) دانشگاه علم و صنعت ایران در سال 1393 (2014)
نمایش لیست:
سال :
-
عنوان مقاله ISIسال انتشارنویسنده*سمتزباندانلود مقالات
-
2014Hassan AsgharianResearch Center of Information Technology, Department of Computer Engineering, Iran University of Science and Technology Tehran, Iran.,انگلیسی
-
Using eye movement analysis to study auditory effects on visual memory recall.2014Ramtin Zargari MarandiDepartment of Biomedical Engineering, Iran University of Science and Technology, Narmak, Tehran, Iran.,انگلیسی
-
Design and Fabrication of an Instrumented Handrim to Measure the Kinetic and Kinematic Information by the Hand of User for 3D Analysis of Manual Wheelchair Propulsion Dynamics.2014Mohammadreza MallakzadehDepartment of Mechanical Engineering, Biomechanics Group, Iran University of Science and Technology, Tehran, Iran.,انگلیسی
-
2014Abed KhorasaniBiomedical Engineering Department, Faculty of Electrical Engineering, Iran University of Science and Technology (IUST), Narmak, 16846-13114, Tehran, Iran.,انگلیسی
-
2014Mehdi BehrooziBiomedical Engineering Department, Faculty of Electrical Engineering, Iran University of Science and Technology (IUST), Narmak, Tehran 16846-13114, Iran , School of Cognitive Sciences (SCS), Institute for Research in Fundamental Science (IPM), P. O. Box 19395-5746, Niavaran, Tehran, Iran.,انگلیسی
-
Evaluation of Phase Locking and Cross Correlation Methods for Estimating the Time Lag between Brain Sites: A Simulation Approach.2014Mohammad Javad SoltanzadehNeuroscience Research Laboratory, Biomedical Engineering Department, Faculty of Electrical Engineering, Iran University of Science and Technology (IUST), Tehran, Iran.,انگلیسی
-
Adaptive Fractional-order Control for Synchronization of Two Coupled Neurons in the External Electrical Stimulation.2014M R Rahmani MehdiabadiElectrical Engineering Department, Iran University of Science and Technology, IUST, Tehran, Iran.,انگلیسی
-
A new seeded region growing technique for retinal blood vessels extraction.2014Atefeh Sadat SajadiDepartment of Biomedical Engineering, School of Electrical Engineering, Iran University of Science and Technology, Tehran, Iran.,انگلیسی
-
2014Moharam H KorayemRobotic Research Laboratory,Center of Excellence in Experimental Solid Mechanics and Dynamics,School of Mechanical Engineering,Iran University of Science and Technology,PO Box 18846,Tehran,Iran.,انگلیسی
-
2014Nafiseh SedaghatComputer Engineering Department, Iran University of Science and Technology, Tehran, Iran.,انگلیسی
-
2014S M A RahmatiDepartment of Mechanical Engineering, Iran University of Science and Technology, Iran. Electronic address: smarahmati@mecheng.iust.ac.ir.,انگلیسی
-
2014Yousef AlipouriFaculty of Electrical Engineering, Iran University of Science and Technology, Tehran, Iran.,انگلیسی
-
2014Ghodousi ParvizCivil Engineering Department, Iran University of Science and Technology, Tehran, Iran.,انگلیسی
-
2014Alireza KarimiFrom the School of Mechanical Engineering, Iran University of Science and Technology , Tehran , Iran.,انگلیسی
-
2014B SohrabiDepartment of Chemistry, Surface Chemistry Research Laboratory, Iran University of Science and Technology , P.O. Box 16846-13114, Tehran, Iran.,انگلیسی
-
2014Hossein Afzalimehrانگلیسی
-
2014Fereidoun Aminiانگلیسی
-
2014Abolfazl FalahatiIran University of Science and Technology, Department of Electrical Engineering (DCCS Lab), Tehran, Iranانگلیسی
-
2014Mohammad T. SalehiIran University of Science and Technology, School of Metallurgy & Materials Engineering, Tehran, Iranانگلیسی
-
2014Taheri-Behroozانگلیسی
-
2014RastegariIran University of Science and Technology, Center of Excellence for High Strength Alloys Technology (CEHSAT), Tehran, Iranانگلیسی
-
2014Seyed Abolfazl Seyedsadjadiانگلیسی
-
2014Mansoor AnbiaIran University of Science and Technology, Research Laboratory of Nanoporous Materials, Tehran, Iranانگلیسی
-
2014Mansoor AnbiaIran University of Science and Technology, Research Laboratory of Nanoporous Materials, Tehran, Iranانگلیسی
-
2014Rassoul Noorossanaانگلیسی
-
2014Rassoul Noorossanaانگلیسی
-
2014Rassoul Noorossanaانگلیسی
-
2014Ghaemiانگلیسی
-
2014Ghaemiانگلیسی
-
2014Molavi Arabshahiانگلیسی
-
2014Molavi Arabshahiانگلیسی
-
2014Mahmood M. Shokriehانگلیسی
-
2014Mahmood M. Shokriehانگلیسی
-
2014Afshin Shariat-Mohaymanyانگلیسی
-
2014Afshin Shariat-Mohaymanyانگلیسی
-
2014Majid Sohrabianانگلیسی
-
2014Majid Sohrabianانگلیسی
-
2014Navidbakhshانگلیسی
-
2014Navidbakhshانگلیسی
-
2014Navidbakhshانگلیسی
-
2014Navidbakhshانگلیسی
-
2014HatamiIran University of Science and Technology, Tehran, Iranانگلیسی
-
2014HatamiIran University of Science and Technology, Tehran, Iranانگلیسی
-
2014Barat MojaradiIran University of Science and Technology, School of Civil and Environmental Engineering, Tehran, Iranانگلیسی
-
2014Barat MojaradiIran University of Science and Technology, School of Civil and Environmental Engineering, Tehran, Iranانگلیسی
-
2014Seyed Mohammad Hashemianانگلیسی
-
2014Mohamadhassan TaherianIran University of Science and Technology, Department of Metallurgy and Material Engineering, Tehran, Iranانگلیسی
-
2014Mansour SoltaniehIran University of Science and Technology, Center of Excellence for High Strength Alloys Technology (CEHSAT), Tehran, Iranانگلیسی
-
2014Seyed Hassan Hashemabadiانگلیسی
-
2014Mahmoud Bayatانگلیسی
-
2014Mahmoud Bayatانگلیسی
-
2014Ali AllahverdiIran University of Science and Technology, Research Laboratory of Inorganic Chemical Process Technologies, Tehran, Iranانگلیسی
-
2014Ali AllahverdiIran University of Science and Technology, Research Laboratory of Inorganic Chemical Process Technologies, Tehran, Iranانگلیسی
-
2014MirhabibiIran University of Science and Technology, School of Metallurgy and Materials Engineering, Tehran, Iranانگلیسی
-
2014MirhabibiIran University of Science and Technology, School of Metallurgy and Materials Engineering, Tehran, Iranانگلیسی
-
2014Nargess Sadeghzadeh-NokhodberizIran University of Science and Technology, Department of Electrical Engineering, Tehran, Iranانگلیسی
-
2014Nargess Sadeghzadeh-NokhodberizIran University of Science and Technology, Department of Electrical Engineering, Tehran, Iranانگلیسی
-
2014Montazeri-Ghانگلیسی
-
2014Montazeri-Ghانگلیسی
-
2014KorayemIran University of Science and Technology, Robotic Research Laboratory, Tehran, Iranانگلیسی
-
2014KorayemIran University of Science and Technology, Robotic Research Laboratory, Tehran, Iranانگلیسی
-
2014Navidbakhshانگلیسی
-
2014Navidbakhshانگلیسی
-
2014Behnam DavoodiIran University of Science and Technology, Sustainable Manufacturing Systems Research Laboratory, Tehran, Iranانگلیسی
-
2014Behnam DavoodiIran University of Science and Technology, Sustainable Manufacturing Systems Research Laboratory, Tehran, Iranانگلیسی
-
2014RoostaIran University of Science and Technology, Tehran, Iranانگلیسی
-
2014RoostaIran University of Science and Technology, Tehran, Iranانگلیسی
-
2014Hosssein MehdipoorIran University of Science and Technology, Tehran, Iranانگلیسی
-
2014Hosssein MehdipoorIran University of Science and Technology, Tehran, Iranانگلیسی
-
2014Faeze Brahmanانگلیسی
-
2014Faeze Brahmanانگلیسی
-
2014Hosssein MehdipoorIran University of Science and Technology, Tehran, Iranانگلیسی
-
2014Hosssein MehdipoorIran University of Science and Technology, Tehran, Iranانگلیسی
-
2014ShirvaniIran University of Science and Technology, School of Chemical Engineering, Tehran, Iranانگلیسی
-
2014ShirvaniIran University of Science and Technology, School of Chemical Engineering, Tehran, Iranانگلیسی
-
2014ShirvaniIran University of Science and Technology, School of Chemical Engineering, Tehran, Iranانگلیسی
-
Knowledge, attitude and practice of dentists towards prophylaxis after exposure to blood and body fluids2014MansooriIran University of Science and Technology, Department of Mechanical Engineering, Tehran, Iranانگلیسی
-
Knowledge, attitude and practice of dentists towards prophylaxis after exposure to blood and body fluids2014MansooriIran University of Science and Technology, Department of Mechanical Engineering, Tehran, Iranانگلیسی
-
Knowledge, attitude and practice of dentists towards prophylaxis after exposure to blood and body fluids2014MansooriIran University of Science and Technology, Department of Mechanical Engineering, Tehran, Iranانگلیسی
-
2014Beidaghy Dizajiانگلیسی
-
2014Beidaghy Dizajiانگلیسی
-
2014Hossein SarpoolakiIran University of Science and Technology, Department of Metallurgy and Material Engineering, Tehran, Iranانگلیسی
-
2014Hossein SarpoolakiIran University of Science and Technology, Department of Metallurgy and Material Engineering, Tehran, Iranانگلیسی
-
2014Hossein SarpoolakiIran University of Science and Technology, Department of Metallurgy and Material Engineering, Tehran, Iranانگلیسی
-
2014Mahdi Fazeliانگلیسی
-
2014Mahdi Fazeliانگلیسی
-
2014Seyed Mostafa Hosseinalipourانگلیسی
-
2014Mahdi Fazeliانگلیسی
-
2014Mohammad Reza Gholamianانگلیسی
-
2014Mohammad Reza Gholamianانگلیسی
-
2014Mohammad Reza Gholamianانگلیسی
-
2014Hamid Reza Talesh Bahramiانگلیسی
-
2014Hamid Reza Talesh Bahramiانگلیسی
-
2014Hamid Reza Talesh Bahramiانگلیسی
-
Mechanical behavior obtaining of cardiac contracting cell, using atomic force microscopy (AFM) and analytical relations2014Anahita Ahmadi Soufivandانگلیسی
-
Mechanical behavior obtaining of cardiac contracting cell, using atomic force microscopy (AFM) and analytical relations2014Anahita Ahmadi Soufivandانگلیسی
-
Mechanical behavior obtaining of cardiac contracting cell, using atomic force microscopy (AFM) and analytical relations2014Anahita Ahmadi Soufivandانگلیسی
-
Study of antibacterial effects of different fractions of leaves extract of Ajuga Chamaecistus Ging. Subsp. Scoparia (Bioss) Rech. f. and bioautography of effective fraction2014Moeiniانگلیسی
-
Study of antibacterial effects of different fractions of leaves extract of Ajuga Chamaecistus Ging. Subsp. Scoparia (Bioss) Rech. f. and bioautography of effective fraction2014Moeiniانگلیسی
-
2014Hamidreza Pairodin-Nabiانگلیسی